Single surface PVC membrane press machine MHD38410*240

1.Cold-press for single or piled up flat panel covering. 2.Hot press for the composition or covering of solid doors, flush door

One machine with four functions! 

1.cold press for single or piled up (400mm max.) flat panel covering.

2.hot press for the composition or covering of solid doors, flush doors and panels.

3.press to xover router panels by PVC foil( with or without membrane).

4.double membrane press to cover two sides raised panels with veneer or decorative paper.

Parameter:

Model	MHD3848*200	MHD38410*240
Press platen dimensions	2500*1300mm	3100*130mm
Max.total thrust	200t	240t
Max. specific pressure	6kg/cm²	6kg/cm²
Oil cylinder	100mm*10pcs	100mm*12pcs
Piston stroke of oil cylinder	450mm	450mm
Flat panel Max. dimensions	2390*1190mm	2990*1190mm
(3D by foil)Panel Max. dimensions	2300*1100mm	2900*1100mm
Two side raised panel Max. dimensions	2350*1150mm	2950*1150mm
Hydraulic motor power	5.5kw	5.5kw
Hot oil pump power	2.2kw	2.2kw
Heating pipe power	27kw	36kw
Overall dimensions(L*W*H)	390*160*250cm	450*160*250cm
Net weight	7400kg	8000kg

1. Cold press/ hot press

The press can work as conventional press.

The operator may choose to use it for hot or cold pressing use or not use the installed heating system.

2. Single membrane press

Fitting a membrane on the top press platen, operation can be carried out within three minutes, 

the machine is ready to glue different types of coverings over routed surfaces. 

PVC foil and/or veneer can also be processed. When applying PVC foil, the use of the membrane is not always necessary, 

the machine can work properly without it. If use PVC foil, the use of membrane is according to the actual needs.

     

3. Double membrane press

Placing a second membrane on the bottom platen of the lower platen of the press, 

it can apply veneers or PVC on the two side of the different shaped panels.It takes less time and high efficiency.

  

Single surface PVC membrane press machine MHD38410*240